– A3008 M GEARED HEAD MILLING MACHINE
GENERAL INFORMATION
ARBOGA A3008M: When the set drill depth is reached, the spindle will automatically return to the starting point. The feed gear box is provided with an automatic overload protection device, which intervenes, when the drill pressure is too high. The feed can also be interrupted manually.
- Drill head – The drill head is adjustable 360° around the column and can be raised and lowered.
- Gear box – The gear box is built according to our experienced methods for highest possible torque. Helical gears combined with steel gears against reinforced fiber gears in the main gear box ensure higher operating efficiency, a more powerful drive mechanism and smooth operation. The noise level and maintenance of the gear box is reduced to a minimum. The eight (8) spindle speeds are easily selected by changing two handles.
- Power feed (M) – When the set drill depth is reached, the spindle will automatically return to the starting point. The feed gear box is provided with an automatic overload protection device, which intervenes, when the drill pressure is too high. The feed can also be interrupted manually.
- Table – The machine is fitted with a high quality cast iron rectangular table 500 x 400 mm with T-slots and coolant channel.
- Spindle – The spindle is made from steel, with the lower spindle bearing being located as near to the lower part of the spindle as possible, ensuring greater precision and rigidity even in milling operations. It is further adjustable by the journals in the bearings, which guarantee very small tolerances. The spindle is counterbalanced by a tension spring and the spindle return can be adjusted depending on the weight of the tool. It can be locked when carrying out milling operations.
- Column – The column is constructed of steel, which ensures extra rigidity of the machine, giving accurate precision and minimum deviation from the stipulated angle between the drill and the table.
- Base plate – The base plate has a machined surface, complete with T-slots and coolant channel.
- Safety – The machine is supplied with a thermal overload switch, no-volt release and emergency stop. Chuck guard is standard within CE area. (Optional outside CE area.)
OPTIONAL FEATURES
- Automatic reversing – Automatic reversing with micro switch for tapping. Maximum 5 reversals per minute.
- Coolant equipment – Complete tank (15 l), pump with switch and all tubing’s with accessories.
- Tool package – Machine vice, 2 x T-slot nuts, Chuck 1-13 mm B 16 Metabo with arbor, Reduction sleeves
- Machine light – MSC Machine light, LED lamp
- Foot operated start switch – Start and stop pedal. Only for spindle motor, not for power feed.
- Connection cable – Cable 3m or 5m, with 16A CE plug
- Foot operated reversing switch – Foot pedal for changing rotation direction of tapping operations.
- Milling table FB101 – Clamping area 450x242mm. Longitudinal feed 275mm. Cross feed 155mm. Incl. intermediate plate.
- Milling table FB102 – Clamping area 584x242mm. Longitudinal feed 415mm. Cross feed 155mm. Incl. intermediate plate.
- Milling table FB402 – With automatic longitudinal feed. Clamping area 584x242mm. Longitudinal feed 415mm. Cross feed 155mm. Incl. intermediate plate.
- Threaded spindle nose with locking nut – Threaded spindle nose with locking nut for securing milling chuck with collets.
- Rectangular table 600 x 500mm – Instead of standard table. With table adapter.
- Drill chuck with arbor – 0-13mm, 3-16mm or 5-20mm
- Milling chuck – Collets ER 6,8,10,12,16 mm (MT3) or 6,8,10,12,20mm (MT4).
- Chuck guard with/without micro switch – Chuck guard with micro switch is standard on machines within EU.
- Flanged quill – for multi spindle drill head
