– SWING BEAM GUILLOTINES SERIES
GENERAL INFORMATION
The worlds heaviest and robust construction with proven reliability and easy, low maintenance operation. From 6mm up to 13mm mild steel.
- Heavy duty St 44 AI steel construction & Stress relieved frame
- Userfriendly CNC Touchscreen control unit – D-Touch 7
- Easy blade gap adjustment
- Ball integrated front tables
- Ballscrew back gauge, 1000 mm & Automatic swing-up
- Squaring arm with scale & T-Slot & Tilting stop ( L= 1500 mm )
- Support arms T-Slot & Tilting stop ( L=1000 mm )
- Illumination & Shadow line
- 1 mt flip-up finger guards
- Automatically pressure adjusted solid holddowns
- Top and Bottom blades with 4 sides
- Foot pedal
- High performance hydraulics & electronics components
- Swing-up back gauge
FEATURES
D-Touch 7 controller for shears
The DURMA D-Touch 7 controller can be easily programmed as a simple “go to” instruction or complex repetitive cuts at different lengths. To prevent the sheet jamming between the back gauge and the blade, the controller will also allow for automatic retraction of the back gauge during the cut.
▪ Includes ‘Go To’ function of the back gauge
▪ Unlimited memory with USB flash memory
Note (Cutting length cannot be controlled to a precise point)
Blade Gap Adjustment
The gap between the top and bottom blade needs to be adjusted to suit the different material thicknesses. Located on the right side of the machine is the blade gap adjustor. From this one position both sides of the machine are adjusted together. Markings on the adjustor clearly indicate the correct position for each 1mm of plate thickness
Finger Guard, Ball Transfer & Hold Downs
The first one meter of the finger guard can be flipped out of the way for easy viewing of the work piece at the initial point of cut. The hydraulic hold down jacks ensure the plate is held firmly along the entire length of the blade. The hold downs are positioned closer together at the ends of the machine. Not only does this provide better clamping at the crucial start of the cut but also makes narrow plate cutting more accurate.
The front table of the machine is fitted with ball transfers to aid in position large heavy plates.
X Axis Back Gauge
The standard DURMA SB series guillotine features a 1000mm back gauge running on precision ball screws. The ENC 100 controller positions the back gauge to extreme accuracy of ± 0.1mm and with extreme high speed of 120 mm/sec. The ENC 100 controller can automatically retract the back gauge when cutting thin strips to prevent the off-cut jamming between the blade and the back gauge.
OPTIONAL FEATURES
-
CE-Norm for EU
-
HI SPEED ( Stroke/Minute)
-
Motorized blade gap adjustment
-
Laser Cutting Line
-
Light Curtains for Finger Protection
-
“Pneumatic sheet support device “standard -Durma I”
-
Hydraulic anti-twist device
-
Special Throat Depth
-
Backgauge 1250 mm
-
add. Support Arms
-
Adjustable holddown pressure
-
Special blades
-
Oil Coolant
-
Central lubrication manual
-
Central lubrication motorised
-
Adjustable Angle stop 0-180°
-
Special color
-
Control Panel on opposite position
-
Temperature measurement
-
Overseas special packaging
Rear Sheet support systems
– Pneumatic thin sheet support device – Durma I
– Pneumatic thin sheet support device – Durma IV
Manual Protractor
Back Gauge Upgrades
Upgrade to 1250mm Back Gauge
Increase back gauge travel from 1000mm to 1250mm
Upgrade to Motorised Blade Gap
Linked to the CNC controller, with this option the blade gap will automatically adjust to the correct setting given the imputed data of sheet thickness
Throat Gap Upgrades
To allow shearing of material longer than the blade length the DURMA SB series of guillotine can have throat gaps cut at each end of the frame. Provided the cut strip is not larger than the throat distance you can cut plate of any length by multi-cutting. Multi-cutting is where you cut the plate part way through then shuffle the work piece through the throat gap and continue the cut.
Upgrade to 350mm
Upgrade to 500mm
