– GS 200L & GS 250L CNC Lathes
GENERAL INFORMATION
The GS-L Series has all the features of the GS but with a longer turning length.
- Colour LCD
- 3 Jaw Chuck/one set of soft jaws
- Bar feeder interface
- 3 additional spare M code
- Coolant through turret
- Work lighting
- Foot switch
- Tool bag, operation manuals
FEATURES
– High-quality cast iron base integrated structure contributes overall stability, rigidity and durability of the machine.
– Strategically-ribbed, one body 30 degree slant bed design
Rigid Construction
-Heavy duty X-and Z-axis roller type linear guideways feature maximum static and dynamic stiffness for longer machine life.
– C2 class X axis ball screw, pre-tensioned, with double nut, hardened and ground for low noise and low thermal displacement.
– Z axis pre-tensioned ball screw reduces temperature increase during traverse.
– All servo motors are directly coupled to the ball screws. This provides direct drive positive and accurate movement of the carriage.
Headstock Design
– Special headstock design eliminates thermal displacement and assures continuous machining accuracy
– High Winding – 26kW with 386N/m of torque
– Low winding – 18.5kW with 605N/m of torque
Higher Axial and Radial Stiffness
– Higher axial and radial stiffness is achieved by the Hardinge 4 BEARING spindle.
– 2 x 40 degree angular contact bearings to absorb huge thrust
– 2 x roller bearing to keep the spindle running true and eliminate spindle whip
Excellent Accuracy
– Accuracy in accordance to the International Organisation for Standards protocol ISO 230-2
– Full stroke positioning 0.01mm
– Full stroke repeatability 0.005mm
– Actual machining results – Roundness 0.7 µM, Surface finish Ra0.2 µM
12 Station Tool Turret
– 12 station tool turret for 25mm square shank or 40mm round shank tooling
– Bidirectional indexing allows shortest path for reduced non-cut time.
– Positive hydraulic clamping.
Rigid Tapping – Standard
– Synchronization between the main spindle and the Z axis motion provides precise and fast rigid tapping operation.
Fanuc OiTD control system
– Max. machine controlled axes: 4
– Max. Simultaneously controlled axes: 3
– 32 bit 8.4” Colour TFT LCD Display
– Front mounted ATA flash memory card slot
– Part Program Storage: 512KB (1280 metres)
OPTIONAL FEATURES
-
Collet adaption chuck
-
2-speed range spindle
-
Fully programmable tail stock
-
Part catcher
-
Arm type
-
Part conveyor
-
Chip conveyor
-
Tool setter probe
-
Part probe
-
Oil mist collector
-
Bar feeder
-
High pressure coolant through turret
-
Live centre
-
Stack light
-
Auto door
-
Live tooling and C axis – 12 stations live tooling
Fully Programmable Hydraulic Tailstock
– # 5 Morse Taper Tailstock with 1075mm of Travel. 20mm quill movement.
– Max. part length 1012.5mm or (992.5mm with quill extended)
– Min part length 20mm or (0mm with quill extended)
– Rapid traverse speed 5.5 m/min
Live Centre
– High quality live centre suitable for high speed machining
Tool Turret Upgrades
Live Tooling – VDI 40 (Duplomatic)
– 12 station standard
– 8 kW
– 35 Nm torque
– 4,000 rpm
– Live tooling & C-axis
– Index time 0.52 seconds
– Rotation time .06 Sec.
Tool Turrent Upgrades Live Tooling – BMT 65 (Duplomatic)
– 12 station standard
– 4.9 kW
– 27Nm torque
– 4,000 rpm
– Live tooling & C-axis
– Index time 0.52 seconds
– Rotation time .06 Sec.
High pressure coolant
– Through tool turret
– Pressure up to 20 bar
– NOTE 2.8 bar is standard
Mist collector:
– Efficiently filter
– Eliminates oil mist
– Dry smoke from machine
– Enclosure
– Arm type
– With part conveyor
– Left side discharge
– Max part diameter 65mm
– Max part length 160mm
Automation Options
Renishaw tool probe
– Programmable – Automatic / Manual operation
Auto door
– Suitable for productivity
– The door opens automatically at the end of the machining cycle and closes by pressing on two push buttons to ensure operator safety
– Auto power off
Bar Loader Options
Short bar loader
– Bar diameter 5 to 65mm
– Maximum bar length 1250mm
– Must be supported in the headstock
Long bar loader
– Bar diameter 5 to 42mm
– Maximum bar length 3200mm
– Bar capacity diameter 10mm x 28pcs
Swarf Management
Chip Conveyor
Hinge type: For long and scroll chips
Chip Conveyor
Scraper type: For short and fine chip
– Manufactured by AUTOBLOK-SLU-M2
– Self Centring Work System;
– Centring range from 8 to 101mm
– With Draulic power driven centring and manual movement.
[pdf-embedder url = “”]